Infrarecorder portable is not closing properly - 2 exe's say in the processes list..
http://www.overclockers.com.au/pix/index.php?page=image&id=u6sz8sft75620...
I did use it stand alone - with the same issue just took the sceenshot thisway to highlight it
I using it on a flashdrive and have tried 2 PCs - I have erased drive and restored with fresh downloaded files
what might be the problem ?
Visit the Community page
Join our forums
Subscribe to our email newsletter
Subscribe with RSS
Follow us on Facebook
Follow us on LinkedIn
Follow us on Twitter
Follow us on Mastodon
Follow us on BlueSky
all depending on the speed of the flash drive it may take a moment to close the app as it's trying to save the settings directly to the flash drive.
your friendly neighbourhood moderator Zach Thibeau
I did think it might be speed related at first - a few times it closed properly
- when I close infrarecorder manually and wait 5min before trying to remove the thumbstick - it still leaves the exes...
- the 6 or so other apps I'm using close properly
I just tried the 'Guv’nor Portable Workspace' version and it has the same Issue
- its a new verbatim 2GB usb2 - 18mb/s according to HDTach,and I've had it on a C2D6600 based PC .. so its not slow hardware...
well hopefully Travis Carrico the Launchers author will take a look into it and see if it's something in the launcher code but I personally think it's either the pc or the flash drive being slow :/
your friendly neighbourhood moderator Zach Thibeau
i keep getting a FIFO error. the discs seem to work but the error is quite unnerving.
Hopefully Travis and John will release an update for the PAF-version.
But don't rush guys, I've copied the orginial portable version into my PAF-version a few weeks ago
@Travis: The source code has been moved to GPL version 3 (version 0.46.0), the last PAF-version says GPL version 2. And the Installer should remove the old cdrtools binaries.
oddly my problem is not isolated to the PAF. it also covers the non-PAF version as well.