You are here

error 267

20 posts / 0 new
Last post
DiveBum
Offline
Last seen: 13 years 6 months ago
Joined: 2008-12-10 08:39
error 267

Hi, First let me say thank you John for creating such great portable apps. I tell everyone I know about your site and the work that you are doing. Anyway, the issue is that I am running Toucan to back up files that are critical to operations here in our school district. When I first started using Toucan (v2.1) I was getting the error codes listed below but Toucan would run and the files were compressed and backed up. Since v2.3 all that happens is what is listed below and nothing is compressed into the zip file. I have tried running Toucan on the desktop and pointing to other (xls) files... with the same results. Any help would be greatly appreciated.

R/ Bill

Starting...

Time: 08:53:32

Creating file list, this may take some time.
08:53:32: Error: Can not enumerate files in directory 'C:\MapNetNT\SY0809\backup\WORKING.ZIP\' (error 267: the directory name is invalid.)

7-Zip Angel 4.57 Copyright (c) 1999-2007 Igor Pavlov 2007-12-06

Scanning

Updating archive C:\Documents and Settings\#########\Desktop\MapNet_BackUp.zip

Everything is Ok
Creating file list, this may take some time.
08:53:33: Error: Can not enumerate files in directory 'C:\MapNetNT\SY0809\backup\SY0809.DMP\' (error 267: the directory name is invalid.)

7-Zip Angel 4.57 Copyright (c) 1999-2007 Igor Pavlov 2007-12-06

Scanning

Updating archive C:\Documents and Settings\#########\Desktop\MapNet_BackUp.zip

Everything is Ok
Creating file list, this may take some time.
08:53:34: Error: Can not enumerate files in directory 'C:\MapNetNT\SY0809\backup\EXPORT.LOG\' (error 267: the directory name is invalid.)

7-Zip Angel 4.57 Copyright (c) 1999-2007 Igor Pavlov 2007-12-06

Scanning

Updating archive C:\Documents and Settings\#########\Desktop\MapNet_BackUp.zip

Everything is Ok

Time: 08:53:34

Elasped: 00:00:02

Finished

Steve Lamerton
Steve Lamerton's picture
Offline
Last seen: 10 years 6 months ago
Developer
Joined: 2005-12-10 15:22
I

shall look into this some more, I initially thought that it was the full stops you had in folder names that was causing this but I cannot reproduce this in my testing Sad

pmuldoon
Offline
Last seen: 15 years 1 month ago
Joined: 2008-12-14 20:55
Same thing here

Hi Steve

I just downloaded & installed the latest version 2.0.3. I am getting the same error on my Vista Ultimate 32-bit laptop. I have tried to backup single files, even a small filename directly off the C: drive and it still gives me that error message. I really like what I see in Toucan, but unfortunately it is useless to me until there is a fix for this. Any luck yet? Thanks for your help.

Patrick

Steve Lamerton
Steve Lamerton's picture
Offline
Last seen: 10 years 6 months ago
Developer
Joined: 2005-12-10 15:22
If

you download an older version from here do you get the same problem?

pmuldoon
Offline
Last seen: 15 years 1 month ago
Joined: 2008-12-14 20:55
2.0.2 does not work; 2.0.1

2.0.2 does not work; 2.0.1 DOES work.

DiveBum
Offline
Last seen: 13 years 6 months ago
Joined: 2008-12-10 08:39
2.0.4

I just saw that 2.0.4 was out... I downloaded and installed it on the thumbdrive. I ran the backup and it did compress and back up the files as needed, I did get the following output:

"Starting...

Time: 14:30:28

Creating file list, this may take some time.
14:30:28: Error: Can not enumerate files in directory 'C:\MapNetNT\SY0809\backup\WORKING.ZIP\' (error 267: the directory name is invalid.)

7-Zip Angel 4.64 Copyright (c) 1999-2009 Igor Pavlov 2009-01-03

Scanning

Updating archive C:\Documents and Settings\#########\Desktop\MapNet_BackUp.zip

Everything is Ok
Creating file list, this may take some time.
14:30:50: Error: Can not enumerate files in directory 'C:\MapNetNT\SY0809\backup\SY0809.DMP\' (error 267: the directory name is invalid.)

7-Zip Angel 4.64 Copyright (c) 1999-2009 Igor Pavlov 2009-01-03

Scanning

Updating archive C:\Documents and Settings\#########\Desktop\MapNet_BackUp.zip

Everything is Ok
Creating file list, this may take some time.
14:30:57: Error: Can not enumerate files in directory 'C:\MapNetNT\SY0809\backup\EXPORT.LOG\' (error 267: the directory name is invalid.)

7-Zip Angel 4.64 Copyright (c) 1999-2009 Igor Pavlov 2009-01-03

Scanning

Updating archive C:\Documents and Settings\#########\Desktop\MapNet_BackUp.zip

Everything is Ok

Time: 14:31:03

Elapsed: 00:00:35

Finished"

Thanks guys!!!

Steve Lamerton
Steve Lamerton's picture
Offline
Last seen: 10 years 6 months ago
Developer
Joined: 2005-12-10 15:22
Well

I am glad it backed up the files, that is a good start Smile I shall have a dig in the source of the toolkit I use to try and clear up these errors once and for all!

DiveBum
Offline
Last seen: 13 years 6 months ago
Joined: 2008-12-10 08:39
No good

Okay... I went to run my weekly back up. It did create the zip file but did not compress the files. Please find the log below:

Starting...

Time: 15:49:09

Creating file list, this may take some time.
15:49:09: Error: Can not enumerate files in directory 'C:\MapNetNT\SY0809\backup\WORKING.ZIP\' (error 267: the directory name is invalid.)

7-Zip Angel 4.64 Copyright (c) 1999-2009 Igor Pavlov 2009-01-03

Scanning

Updating archive C:\Documents and Settings\#########\Desktop\MapNet_BackUp.zip

Everything is Ok
Creating file list, this may take some time.
15:49:10: Error: Can not enumerate files in directory 'C:\MapNetNT\SY0809\backup\SY0809.DMP\' (error 267: the directory name is invalid.)

7-Zip Angel 4.64 Copyright (c) 1999-2009 Igor Pavlov 2009-01-03

Scanning

Updating archive C:\Documents and Settings\#########\Desktop\MapNet_BackUp.zip

Everything is Ok
Creating file list, this may take some time.
15:49:11: Error: Can not enumerate files in directory 'C:\MapNetNT\SY0809\backup\EXPORT.LOG\' (error 267: the directory name is invalid.)

7-Zip Angel 4.64 Copyright (c) 1999-2009 Igor Pavlov 2009-01-03

Scanning

Updating archive C:\Documents and Settings\#########\Desktop\MapNet_BackUp.zip

Everything is Ok

Time: 15:49:12

Elapsed: 00:00:03

Finished

Sorry... it worked yesterday. idk
Bill

John T. Haller
John T. Haller's picture
Offline
Last seen: 4 hours 59 min ago
AdminDeveloperModeratorTranslator
Joined: 2005-11-28 22:21
Drive Errors

It would seem this is 7-Zip spitting this error out. The only time I've seen this is when there are logical or physical errors on the drive.

Sometimes, the impossible can become possible, if you're awesome!

DiveBum
Offline
Last seen: 13 years 6 months ago
Joined: 2008-12-10 08:39
Re: Drive Errors

John, Thanks for the response. I did a check disk on the drive concerned as well as ran spinrite on it. It's good. I also took Toucan to two different laptops and ran a toucan test on it... I got the following output:

Starting...

Time: 12:59:24

Creating file list, this may take some time.
12:59:24: Error: Can not enumerate files in directory 'C:\Documents and Settings\XXXXXXX\Desktop\toucantest\Stop_Times.xls\' (error 267: the directory name is invalid.)

7-Zip Angel 4.64 Copyright (c) 1999-2009 Igor Pavlov 2009-01-03
Scanning

Creating archive C:\Documents and Settings\wvdavis\Desktop\TTest.zip

Everything is Ok
Creating file list, this may take some time.
12:59:24: Error: Can not enumerate files in directory 'C:\Documents and Settings\XXXXXXX\Desktop\toucantest\stops.xls\' (error 267: the directory name is invalid.)

7-Zip Angel 4.64 Copyright (c) 1999-2009 Igor Pavlov 2009-01-03

Scanning

Updating archive C:\Documents and Settings\XXXXXXX\Desktop\TTest.zip

Everything is Ok

Time: 12:59:25

Elapsed: 00:00:01

Finished

With bringing it to two other computers and getting the same otput I doubt it is the drive. I will check it on my home desktops if you want further testing. R/ Bill

Steve Lamerton
Steve Lamerton's picture
Offline
Last seen: 10 years 6 months ago
Developer
Joined: 2005-12-10 15:22
What

OS are you running? Is there anything different about it that you know of? This but still puzzles me hugely, it is certainly a wxWidgets and therefore Toucan error, but I have no idea what could cause it.

When you look at the file called Includes.txt in the data directory does it list all of the files that are supposed to be backed up?

DiveBum
Offline
Last seen: 13 years 6 months ago
Joined: 2008-12-10 08:39
Re: What

I am using Windows XP on all three PCs.

I did try something different this morning. I installed Toucan to the root of a thumb drive, and it did run flawlessly... including listing all of the files that are supposed to be backed up in the "includes.txt". I looked at the PC where I am doing the Mapnet backup and these files were not in the include.txt file.

John T. Haller
John T. Haller's picture
Offline
Last seen: 4 hours 59 min ago
AdminDeveloperModeratorTranslator
Joined: 2005-11-28 22:21
File vs Directory

Hmm... after looking at it again, it seems it's trying to treat this file:
C:\Documents and Settings\XXXXXXX\Desktop\toucantest\Stop_Times.xls

As a directory. Which it shouldn't. Any chance you have some odd settings in Toucan itself that maybe aren't being interpreted correctly?

Sometimes, the impossible can become possible, if you're awesome!

DiveBum
Offline
Last seen: 13 years 6 months ago
Joined: 2008-12-10 08:39
Re: File vs Directory

John, There is not any special settings or variables on this...

John T. Haller
John T. Haller's picture
Offline
Last seen: 4 hours 59 min ago
AdminDeveloperModeratorTranslator
Joined: 2005-11-28 22:21
I meant

Are you telling it to backup specific directories. Or are you manually specifying any files, like the file mentioned above, for instance?

Sometimes, the impossible can become possible, if you're awesome!

DiveBum
Offline
Last seen: 13 years 6 months ago
Joined: 2008-12-10 08:39
Re: I Meant

As you mentioned “it seems it's trying to treat this file:
C:\Documents and Settings\XXXXXXX\Desktop\toucantest\Stop_Times.xls as a directory.
When I select the first file within the folder it does list that file and then shows every subsequent file as a subfile under the first. For some reason the program treats the first file selected as a folder.
I can select the main folder, and it will back up everything in that folder. I have tried removing, excluding the files and sub folders, but the program will not allow me to do that.
Also, it seems that Toucan is not saving anything in the Include.txt file until “OK” is selected. IDK

To answer your question I only want three files from within the back up folder of the program. If you look at the log file at the top of the thread you'll see what I mean. John, thanks for all of your help man. I do appreciate it.

R/ Bill

DiveBum
Offline
Last seen: 13 years 6 months ago
Joined: 2008-12-10 08:39
It works

Guys, I think I have it figured out... I did not set up rules. I thought that you could just go to back up and select the files that you wanted to have backed up. I went to the rules tab specified the files that I wanted... I then went to the Back Up tab and selected new job, then included the "rules" in the rules drop down. I was then able to exclude the other files and sub folders I did not want. I have shut down Toucan and twice now, ran the back up three times and it seems to be working now. I will let you know if I have any other issues. Thanks again John & Steve. R/Bill

Steve Lamerton
Steve Lamerton's picture
Offline
Last seen: 10 years 6 months ago
Developer
Joined: 2005-12-10 15:22
Right,

I finally have this bug found! The issue is with adding individual files to back them up, I assumed you were backing up entire folders. I shall either fix this in the next version or disable it.

DiveBum
Offline
Last seen: 13 years 6 months ago
Joined: 2008-12-10 08:39
I'm sorry Steve. I should

I'm sorry Steve. I should have been more explicit with what I was doing. I was only looking to back up three certain files out of the folder. Though Mapnet's scripting does rename the old files prior to creating the new backup and these files are backup on a local server. These files are essential to our Transportation Department's routing of the students. I want to make sure I have an off site copy just in case. I do sincerely thank you guys for all the assistance you have provided. R/Bill

Steve Lamerton
Steve Lamerton's picture
Offline
Last seen: 10 years 6 months ago
Developer
Joined: 2005-12-10 15:22
No

worries, once again I have learned the truth in the phrase 'assume make an ass out of you and me' and it certainly made one out of me this time Biggrin

It shall be fixed in the next version, I think I have already tracked the problem down Smile

Log in or register to post comments