You are here

[Fixed] PeerBlock Portable 1.1 r518 not starting on Windows Server 2003

11 posts / 0 new
Last post
dayvsea
Offline
Last seen: 1 week 6 days ago
Joined: 2011-01-02 16:24
[Fixed] PeerBlock Portable 1.1 r518 not starting on Windows Server 2003

Will not fire up for me.. installed
C:\Portables\PEER BLOCK\PeerBlockPortable
Server 2003, service pack 2 installed

John T. Haller
John T. Haller's picture
Online
Last seen: 43 min 12 sec ago
AdminDeveloperModeratorTranslator
Joined: 2005-11-28 22:21
Run Directly

Can you run it directly? Browse to the PeerBlockPortable\App\PeerBlock\Legacy32 (or 64 if you're 64-bit) and run it directly to see if it works. Make a backup of the folder first as it will save settings to that folder and then delete and restore when done.

Sometimes, the impossible can become possible, if you're awesome!

dayvsea
Offline
Last seen: 1 week 6 days ago
Joined: 2011-01-02 16:24
Yah that flies, why not from

Yah that flies, why not from the installer?

John T. Haller
John T. Haller's picture
Online
Last seen: 43 min 12 sec ago
AdminDeveloperModeratorTranslator
Joined: 2005-11-28 22:21
Bad Detection

It could be bad detection of Server 2003. We're using the If AtLeastWinVista function to switch to the Modern equivalents. Likely it doesn't properly detect Server 2003 as being XP equivalent. It probably isn't tested with it as Server isn't really designed for everyday desktop use. Which one did you use that worked? And does the Modern one not work?

Sometimes, the impossible can become possible, if you're awesome!

dayvsea
Offline
Last seen: 1 week 6 days ago
Joined: 2011-01-02 16:24
Legacy32 was used, the modern

Legacy32 was used, the modern gave me .dll errors...

John T. Haller
John T. Haller's picture
Online
Last seen: 43 min 12 sec ago
AdminDeveloperModeratorTranslator
Joined: 2005-11-28 22:21
Ah Ok

Looks like that's my mistake on a replace. Try this updated launcher: PeerBlockPortable.exe to ensure this works and then I'll push out a revision.

Sometimes, the impossible can become possible, if you're awesome!

dayvsea
Offline
Last seen: 1 week 6 days ago
Joined: 2011-01-02 16:24
Runs from launcher now, using

Runs from launcher now, using legacy 32bit. Did you say to lose a config and try the modern, or was that my ever fading recall?

John T. Haller
John T. Haller's picture
Online
Last seen: 43 min 12 sec ago
AdminDeveloperModeratorTranslator
Joined: 2005-11-28 22:21
Config

When you ran it directly, it stored its config within the App directory. That's why I suggested backing it up and restoring.

I'll post a revision shortly (unless we lose power due to Sandy), so I'd suggest doing a fresh install of that and then going from there. Smile

Sometimes, the impossible can become possible, if you're awesome!

John T. Haller
John T. Haller's picture
Online
Last seen: 43 min 12 sec ago
AdminDeveloperModeratorTranslator
Joined: 2005-11-28 22:21
Fixed in 1.1 r518 Rev 2

This is fixed in 1.1 r518 Rev 2. Windows Server 2003 will now correctly use the Legacy version of PeerBlock.

Sometimes, the impossible can become possible, if you're awesome!

dayvsea
Offline
Last seen: 1 week 6 days ago
Joined: 2011-01-02 16:24
And it does..Bravo John!

And it does..Bravo John!

John T. Haller
John T. Haller's picture
Online
Last seen: 43 min 12 sec ago
AdminDeveloperModeratorTranslator
Joined: 2005-11-28 22:21
Welcome

You're welcome, David Smile

Sometimes, the impossible can become possible, if you're awesome!

Log in or register to post comments