You are here

Is there any body is working on CAD?

25 posts / 0 new
Last post
rampariajk
Offline
Last seen: 17 years 1 day ago
Joined: 2007-04-20 10:55
Is there any body is working on CAD?

Hi,

Is there any body is working on portable cad or cam? Is there any cad software available for portable Apps menu.

Regards
Jay

Duplicate topic deleted by moderator JTH. Please re-read the forum guidelines.

roamer
roamer's picture
Offline
Last seen: 15 years 1 week ago
Joined: 2007-02-21 16:01
Well,

not to disapoint you, but this is app requests. Your question deals more with General Dicsussion.

BTW: I searched SourceForge.net and this is the page I found:
http://sourceforge.net/search/?type_of_search=soft&words=CAD
http://sourceforge.net/projects/avocado-cad/

Disclaimer!!! I did not try any of these. They may or may not do what you want. It is not my fault if they are not what you want. They may or may not work with PAM. These are just some opensource CAD tools and programs.
__________________________________________
Long Live the Wiki[INSERT WORD HERE]

OliverK> you don't live on a cow
IRC: It brings out the best in all of us...Especially when tired.

solanus
solanus's picture
Offline
Last seen: 10 years 2 months ago
Joined: 2006-01-21 19:12
avoCADo is still pre-Alpha, but maybe check out BRL-CAD

Also found on SourceForge, this is a package that's been used by the military for a while.
http://brlcad.org/
http://sourceforge.net/projects/brlcad/

Solanus, The East Wind

I made this half-pony, half-monkey monster to please you.

solanus
solanus's picture
Offline
Last seen: 10 years 2 months ago
Joined: 2006-01-21 19:12
Too bad Google Sketchup is not GPL

AND writes tons of stuff to the registry.
It is pretty easy to use, and can read AutoCAD files.

Solanus, The East Wind

I made this half-pony, half-monkey monster to please you.

arqbrulo
arqbrulo's picture
Offline
Last seen: 4 years 10 months ago
Joined: 2006-08-10 16:38
CAD

If you use AutoCAD, there really is no open-source program that can compare to it. I've downloaded a few and tried them, but it lacks a lot of functions. And I have to admit, I downloaded a pirated version of "Portable Autocad" but it was VERRRRY, VERRRRY slow and left files behind, so I got rid of it. And to make a good portable version of Autocad will be very difficult (besides the legality of it), since it depends on a lot of dll's reg entries, and files and folders located throughout the system.
---------------
"Truth is a river that is always splitting up into arms that reunite. Islanded between the arms, the inhabitants argue for a lifetime as to which is the main river." -- Cyril Connolly1

"In three words I can sum up everything I've learned about life: it goes on." -- Robert Frost
"In three words I can sum up everything I've learned about life: baby ain't mine." -- Adam Holguin

Simeon
Simeon's picture
Offline
Last seen: 10 years 2 months ago
DeveloperTranslator
Joined: 2006-09-25 15:15
Tststs

Using a pirated version...*shakes head with astonished disgust*
Wink
“I can live with doubt and uncertainty and not knowing. I think it is much more interesting to live not knowing than to have answers that might be wrong.” - Richard P. Feynman

"What about Love?" - "Overrated. Biochemically no different than eating large quantities of chocolate." - Al Pacino in The Devils Advocate

arqbrulo
arqbrulo's picture
Offline
Last seen: 4 years 10 months ago
Joined: 2006-08-10 16:38
Oh, come on

Like I'm the only one here who has ever done this Wink Besides, that was back a few years ago, in my "pirated software of everything" era, now I'm in the "FOSS for everything" era.
---------------
"Truth is a river that is always splitting up into arms that reunite. Islanded between the arms, the inhabitants argue for a lifetime as to which is the main river." -- Cyril Connolly

"In three words I can sum up everything I've learned about life: it goes on." -- Robert Frost
"In three words I can sum up everything I've learned about life: baby ain't mine." -- Adam Holguin

rampariajk
Offline
Last seen: 17 years 1 day ago
Joined: 2007-04-20 10:55
Is there any body is working on CAD?....

Hi Everyone,

I have posted a request for portable cad just because I like to work on portable menu and its always with me in my usb drive even in office or any where else...any way thanks for all your replies and sugessions. Still hunting for a cad solution which can be run and used with portable apps menu.

Regards
Jay

Jay

kl0an
Offline
Last seen: 14 years 9 months ago
Joined: 2007-03-15 17:30
How about something like PocketDGN

I've used it on my old Jornada 548. It would read and write Autocad .dwg files. It's more towards .dgn files but, Autocad will work with them as well.

Aciago
Aciago's picture
Offline
Last seen: 1 year 1 month ago
Joined: 2007-01-24 14:23
no

Is not for Portable drives, just for Pocket PCs, and is not GPL (in fact is not even freeware or shareware)...

If a packet hits a pocket on a socket on a port,
and the bus is interrupted as a very last resort,
and the address of the memory makes your floppy disk abort,
then the socket packet pocket has an error to report Biggrin

cdubea
Offline
Last seen: 16 years 2 months ago
Joined: 2007-12-19 14:44
LiteCAD

LiteCAD (http://www.litecad.com) is free and runs portably. Yes the website is sparse. It will open dwg files, but is definitely a work in progress. No dimensioning capability yet.

Good luck

chris

lwc
Offline
Last seen: 1 month 2 days ago
Translator
Joined: 2006-04-26 06:35
3 years later - what DWG support?
kanaiyakhatri
Offline
Last seen: 15 years 4 months ago
Joined: 2009-07-26 08:07
portable cad

looking for portable cad
[Portable] BricsCad PROFESSIONAL 9.2.13.1 (Fully Compatible with Autodesk & AutoCAD)
please follow this link http://torrentz.com/897ca03ce71bb15ef027663bc44231535263b75e.
have using since 3 month.

Zach Thibeau
Zach Thibeau's picture
Offline
Last seen: 2 years 1 month ago
Developer
Joined: 2006-05-26 12:08
kanaiyakhatri I'm going to

kanaiyakhatri I'm going to have to ask you to remove your link as this is to a torrent site and the app in general is considered warez which is against the forum rules.

your friendly neighbourhood moderator Zach Thibeau

bpmackow
Offline
Last seen: 13 years 3 months ago
Joined: 2011-01-30 18:59
K-3D Portable

"Insanity is doing the same thing over and over and expecting different results." - Albert Einstein

My use of Google indicates that I am insane.

lwc
Offline
Last seen: 1 month 2 days ago
Translator
Joined: 2006-04-26 06:35
What does it open?

Does it open DWG?

bpmackow
Offline
Last seen: 13 years 3 months ago
Joined: 2011-01-30 18:59
no clue

check out their website: http://www.k-3d.org/

"Insanity is doing the same thing over and over and expecting different results." - Albert Einstein

My use of Google indicates that I am insane.

lwc
Offline
Last seen: 1 month 2 days ago
Translator
Joined: 2006-04-26 06:35
The answer is no
mjashby
Offline
Last seen: 9 months 2 weeks ago
Developer
Joined: 2008-09-19 13:35
CAD Applications

Do you know of any Open Source, or even Freeware, CAD Apps that open/save the DWG Files you've mentioned and do whatever else you want?

I have a couple of Apps queued to look at when I have the time, i.e. CADEMIA (which has been done before, but seems to have been abandoned) and FreeCAD, but I haven't checked their capabilities yet.

MJA

elfert
elfert's picture
Offline
Last seen: 11 years 10 months ago
Joined: 2009-10-22 15:22
Speaking of CAD take a look at NaroCAD

www.narocad.com i think it is GPL license so i hope that the developer want to make it portable and part of portable apps what is the best.

elfert

John T. Haller
John T. Haller's picture
Online
Last seen: 33 min 53 sec ago
AdminDeveloperModeratorTranslator
Joined: 2005-11-28 22:21
.NET 3.5

It should be noted that this requires .NET 3.5.

Sometimes, the impossible can become possible, if you're awesome!

elfert
elfert's picture
Offline
Last seen: 11 years 10 months ago
Joined: 2009-10-22 15:22
Okay i see you point! what

Okay i see you point! what does it take then to make it portable? a reprogramming?

ByteMyAscii
Offline
Last seen: 6 years 9 months ago
Joined: 2012-12-02 15:30
The problem with .net

The problem with .net applications is the fairly low likelyhood of the runtimes being present on many machines, particularly Windows XP machines where there is no version of the .net runtimes included by default.

The .net runtimes are basically a common library of pre-done features which can be utilised on your applications, so are not a trivial matter to simply bypass the need for.

There are plans to provide .net applications via this platform, but that is not a very high priority for the above reason.

Them having a requirement which is not portable and not sufficiently likely to be present on another system.

If at first you do not succeed, use more sticky tape.

Ravensun
Offline
Last seen: 11 years 3 weeks ago
Joined: 2010-10-09 04:13
BRL-CAD

I need some 3D Cad software for example BRL-CAD like portable application, because I have not got admin account on my PC
Is anybody able make a BRL-CAD portable, please?
BRL-CAD website:http://brlcad.org/d/download
Thanks.

tassel
Offline
Last seen: 10 years 10 months ago
Joined: 2014-01-27 02:58
Please make a portable version of this CAD tool, THANKS!!!!!

Always being imaging!

Log in or register to post comments