Hi,
Is there any body is working on portable cad or cam? Is there any cad software available for portable Apps menu.
Regards
Jay
Duplicate topic deleted by moderator JTH. Please re-read the forum guidelines.
New: Run-Command (Dec 2, 2024), Platform 29.5.3 (Jun 27, 2024)
1,100+ portable packages, 1.1 billion downloads
No Ads November!, Please donate today
Hi,
Is there any body is working on portable cad or cam? Is there any cad software available for portable Apps menu.
Regards
Jay
Duplicate topic deleted by moderator JTH. Please re-read the forum guidelines.
not to disapoint you, but this is app requests. Your question deals more with General Dicsussion.
BTW: I searched SourceForge.net and this is the page I found:
http://sourceforge.net/search/?type_of_search=soft&words=CAD
http://sourceforge.net/projects/avocado-cad/
Disclaimer!!! I did not try any of these. They may or may not do what you want. It is not my fault if they are not what you want. They may or may not work with PAM. These are just some opensource CAD tools and programs.
__________________________________________
Long Live the Wiki[INSERT WORD HERE]
OliverK> you don't live on a cow
IRC: It brings out the best in all of us...Especially when tired.
Also found on SourceForge, this is a package that's been used by the military for a while.
http://brlcad.org/
http://sourceforge.net/projects/brlcad/
Solanus, The East Wind
I made this half-pony, half-monkey monster to please you.
AND writes tons of stuff to the registry.
It is pretty easy to use, and can read AutoCAD files.
Solanus, The East Wind
I made this half-pony, half-monkey monster to please you.
If you use AutoCAD, there really is no open-source program that can compare to it. I've downloaded a few and tried them, but it lacks a lot of functions. And I have to admit, I downloaded a pirated version of "Portable Autocad" but it was VERRRRY, VERRRRY slow and left files behind, so I got rid of it. And to make a good portable version of Autocad will be very difficult (besides the legality of it), since it depends on a lot of dll's reg entries, and files and folders located throughout the system.
---------------
"Truth is a river that is always splitting up into arms that reunite. Islanded between the arms, the inhabitants argue for a lifetime as to which is the main river." -- Cyril Connolly1
"In three words I can sum up everything I've learned about life: it goes on." -- Robert Frost
"In three words I can sum up everything I've learned about life: baby ain't mine." -- Adam Holguin
Using a pirated version...*shakes head with astonished disgust*
“I can live with doubt and uncertainty and not knowing. I think it is much more interesting to live not knowing than to have answers that might be wrong.” - Richard P. Feynman
"What about Love?" - "Overrated. Biochemically no different than eating large quantities of chocolate." - Al Pacino in The Devils Advocate
Like I'm the only one here who has ever done this Besides, that was back a few years ago, in my "pirated software of everything" era, now I'm in the "FOSS for everything" era.
---------------
"Truth is a river that is always splitting up into arms that reunite. Islanded between the arms, the inhabitants argue for a lifetime as to which is the main river." -- Cyril Connolly
"In three words I can sum up everything I've learned about life: it goes on." -- Robert Frost
"In three words I can sum up everything I've learned about life: baby ain't mine." -- Adam Holguin
Hi Everyone,
I have posted a request for portable cad just because I like to work on portable menu and its always with me in my usb drive even in office or any where else...any way thanks for all your replies and sugessions. Still hunting for a cad solution which can be run and used with portable apps menu.
Regards
Jay
Jay
I've used it on my old Jornada 548. It would read and write Autocad .dwg files. It's more towards .dgn files but, Autocad will work with them as well.
Is not for Portable drives, just for Pocket PCs, and is not GPL (in fact is not even freeware or shareware)...
If a packet hits a pocket on a socket on a port,
and the bus is interrupted as a very last resort,
and the address of the memory makes your floppy disk abort,
then the socket packet pocket has an error to report
LiteCAD (http://www.litecad.com) is free and runs portably. Yes the website is sparse. It will open dwg files, but is definitely a work in progress. No dimensioning capability yet.
Good luck
chris
http://www.kolbasoft.com/forum/viewtopic.php?t=9
looking for portable cad
[Portable] BricsCad PROFESSIONAL 9.2.13.1 (Fully Compatible with Autodesk & AutoCAD)
please follow this link http://torrentz.com/897ca03ce71bb15ef027663bc44231535263b75e.
have using since 3 month.
kanaiyakhatri I'm going to have to ask you to remove your link as this is to a torrent site and the app in general is considered warez which is against the forum rules.
your friendly neighbourhood moderator Zach Thibeau
Already done.
https://portableapps.com/apps/graphics_pictures/k-3d_portable
"Insanity is doing the same thing over and over and expecting different results." - Albert Einstein
My use of Google indicates that I am insane.
Does it open DWG?
check out their website: http://www.k-3d.org/
"Insanity is doing the same thing over and over and expecting different results." - Albert Einstein
My use of Google indicates that I am insane.
http://www.k-3d.org/forums/topic/dxf-import
Do you know of any Open Source, or even Freeware, CAD Apps that open/save the DWG Files you've mentioned and do whatever else you want?
I have a couple of Apps queued to look at when I have the time, i.e. CADEMIA (which has been done before, but seems to have been abandoned) and FreeCAD, but I haven't checked their capabilities yet.
MJA
www.narocad.com i think it is GPL license so i hope that the developer want to make it portable and part of portable apps what is the best.
elfert
It should be noted that this requires .NET 3.5.
Sometimes, the impossible can become possible, if you're awesome!
Okay i see you point! what does it take then to make it portable? a reprogramming?
The problem with .net applications is the fairly low likelyhood of the runtimes being present on many machines, particularly Windows XP machines where there is no version of the .net runtimes included by default.
The .net runtimes are basically a common library of pre-done features which can be utilised on your applications, so are not a trivial matter to simply bypass the need for.
There are plans to provide .net applications via this platform, but that is not a very high priority for the above reason.
Them having a requirement which is not portable and not sufficiently likely to be present on another system.
If at first you do not succeed, use more sticky tape.
I need some 3D Cad software for example BRL-CAD like portable application, because I have not got admin account on my PC
Is anybody able make a BRL-CAD portable, please?
BRL-CAD website:http://brlcad.org/d/download
Thanks.
Here is a Free CAD software I found.
http://www.downloadcollection.com/progecad_smart__free_dwg_cad.htm
Always being imaging!