You are here

Good & Bad News for Vista Upgrade Status on U3 Drives

10 posts / 0 new
Last post
rjreid
Offline
Last seen: 16 years 6 months ago
Joined: 2006-12-31 13:31
Good & Bad News for Vista Upgrade Status on U3 Drives

reprint from http://www.everythingusb.com/

The good news is that U3 launchpad version 1.4 and higher supports Vista. The bad news is that the update can only be obtained from the U3 drive manufacturers as U3 does not distribute Launchpad updates. If they are slow at adopting the new U3 core, then you will have wait longer or perhaps will shell out for a new drive instead. There are more complications due to Vista compatibility with the mobile apps themselves and the legacy hardware issues that prevent launchpad upgrade for some U3 drives. For example, Sandisk U3 drives with firmware 2.1.5 and 2.2.1 support Vista while firmware 2.1.6, 2.1.7, 2.1.8, 2.2.0 do not. No words about status from Verbatim, Memorex, PQI on their upgrade timeline, but Sandisk will post 1.4 updates in March.

U3 Newbie Guide from same site:
http://www.everythingusb.com/u3.html

Regards,

scoutconnor
scoutconnor's picture
Offline
Last seen: 15 years 4 months ago
Joined: 2006-10-26 11:50
how can you tell..?

how can you tell what firmware your drive has?

my drive is an Ativa 2GB U3 Smart drive in my about U3 section has this information:

U3 Launchpad Version:1,0,5,17
Divice Serial Number:--------------------
Divice Version:6.51
ADAPI Version: 4.40.41 Unicode

Will my drive work with Vista?

techsavvy
Offline
Last seen: 16 years 7 months ago
Joined: 2007-08-27 18:02
aptiva u3 update

http://www.clever-stuff.ie/support/index.shtml
follow this link and you will read that only units bought in europe are supported for the vista update.
you cannot get an update except through the update function in the launchpad while running in xp etc.

there is no vista update for aptiva drives bought at office depot in the U.S.
as of 8/27/07

SmithTech
SmithTech's picture
Offline
Last seen: 1 year 11 months ago
Developer
Joined: 2006-11-24 18:06
Last I checked (a couple

Last I checked (a couple days ago)
Disk2Go, Intuix, Kingston and Verbatim had LaunchPad updates on their website.
And if you don't mind having a LaunchPad from a different manufacturer on your drive, you can hex edit the installer to install to your drive if you have a different manufacturer.

For those who have fought for it, freedom has a flavor the protected will never know

"Because they stand on a wall and say, 'Nothing is going to hurt you tonight. Not on my watch.'" (A Few Good Men)
Coincidence is God's way of remaining anonymous.(Albert Einstein)

scoutconnor
scoutconnor's picture
Offline
Last seen: 15 years 4 months ago
Joined: 2006-10-26 11:50
How?

how can you install it? do you know where to download it?

SmithTech
SmithTech's picture
Offline
Last seen: 1 year 11 months ago
Developer
Joined: 2006-11-24 18:06
Links to download

Links to download pages.
Kingston Download Page
Intuix Download Page
Verbatim Download Page
Disk2Go Download Page

If you have a drive from another manufacturer, try finding an update on their support pages.

For those who have fought for it, freedom has a flavor the protected will never know

"Because they stand on a wall and say, 'Nothing is going to hurt you tonight. Not on my watch.'" (A Few Good Men)
Coincidence is God's way of remaining anonymous.(Albert Einstein)

scoutconnor
scoutconnor's picture
Offline
Last seen: 15 years 4 months ago
Joined: 2006-10-26 11:50
Do you know...

if Ativa has released an update?
do you know if they are going to?

SmithTech
SmithTech's picture
Offline
Last seen: 1 year 11 months ago
Developer
Joined: 2006-11-24 18:06
Don't know. I just found the

Don't know.
I just found the info by googling.

For those who have fought for it, freedom has a flavor the protected will never know

"Because they stand on a wall and say, 'Nothing is going to hurt you tonight. Not on my watch.'" (A Few Good Men)
Coincidence is God's way of remaining anonymous.(Albert Einstein)

scoutconnor
scoutconnor's picture
Offline
Last seen: 15 years 4 months ago
Joined: 2006-10-26 11:50
Do You know...?

how to delete the read only U3 files so I can insert another manufacturers U3 software?

scoutconnor
scoutconnor's picture
Offline
Last seen: 15 years 4 months ago
Joined: 2006-10-26 11:50
to edit the installer anyone

to edit the installer anyone who's manufacturer has not released a patch can use SmithTech's directions using the link below:
http://usb.smithtech.us/projects/u3updater.php . It works fine, just download an update from another manufacturer using the links above. just use universal extractor to extract the Launchpad.iso from it and replace the one provided in the cracked installer

Log in or register to post comments