Hello,
I searched the forum with the words of my subject but coudn't find anything.
My question: is there a tool that could test if the USB port I'm using is 2.0 or 1.1?
If yes, is it a portable tool, so I could use it directly from my stick.
Thanks
You are here
USB port tester
February 13, 2007 - 4:25am
#1
USB port tester
February 13, 2007 - 8:53am
#2
If you have a 2.0 stick,
If you have a 2.0 stick, copy a large file (10+ MB) from one directory to another and note the speed. If it finishes in seconds, it's 2.0, if it takes a minute or two, 1.1.
February 15, 2007 - 8:32am
#3
Hi Bahamut,
not really the
Hi Bahamut,
not really the answer I was looking for, but at least an answer :o)
Thanks
Samuel
February 15, 2007 - 10:59am
#4
USB Port 1 or 2
Right click on My Computer.
Select Properties
Select Hardware devices
Select Device Manager
At the bottom click the + on Universal Serial Bus controllers
Look for Standard Enhanced PCI to USB Host Controller or something like it.
The work Enhanced indicates it is USB 2.0 if you do not have the word Enhanced it is USB 1.0
Hope this helps
[Moderator RM removed duplicate post]
March 21, 2007 - 7:52pm
#5
Also...
...the W!nd0w$ versions 2000 and up will say in a little speach bubble "your device can preform faster if pluged into a USB 2.0 port,........." so the PC really just tells you when you insert it into the computer.
-Ummm...
Visit the Community page
Join our forums